印吧(PrintBar)除钙剂墨辊护理香波

印吧除钙剂（墨辊护理香波）  YinBar

除钙剂(去渍液、洗钙水)用于清洁胶辊表面由于钙质污染造成的釉化与硬化，恢复胶辊原有的表面特性,恢复铜辊表面。

包装：1公斤/瓶 15瓶/箱  

产地：上海

1、去除墨辊表面钙质釉质      

2、反应快速，恢复墨辊的导墨性,提高印刷品质及效率

3、有助于使橡胶辊最佳状况

4、对人体无伤害，V0C含量低

5、不影响胶辊，化学物质仅与钙质互相作用

1、 先使用清洗剂充分去除墨辊上的油墨。
2、 在墨辊上适量滴下本剂。墨辊空转（1-5分钟）

3、使用油性清洗剂或乳化型清洗剂进行最后工序的清洗。

4、 合上铲墨刀后必须用水充分清洗干净。

Printing calcium removal

In addition to calcium (to stain liquid, wash calcium water) used to clean the surface of the roller due to calcium pollution caused by glaze and hardening, restore the original surface characteristics of the roller, restore the surface of the copper roller.

Packing: 1 kg/bottle 15 bottles/carton

Place of Origin: Shanghai

1, remove the ink roller surface calcium enamel

2. Fast response, restore the ink-conducting property of the ink roller, improve printing quality and efficiency

3, help to make the rubber roller the best condition

4, no harm to human body, V0C content is low

5, does not affect the roller, chemical interaction with only calcium

1, first use the cleaning agent to fully remove the ink on the roller.

2. Drop this agent on the roller. Ink rollers idle (1-5 minutes)

3, the use of oily cleaning agent or emulsified cleaning agent for the final cleaning process.

4, After closing the knife, it must be fully cleaned with water.